![]() ![]() For security purposes, the password is not displayed. Step 2 Enter the password (the password is case sensitive). The EXEC prompts you for a privileged-level password as follows: Router> enable Step 1 At the user-level EXEC prompt, enter the enable command. ![]() At the console terminal, use the following procedure to enter the privileged level: The system prompt for the privileged level ends with a pound sign (#) instead of an angle bracket (>). The system prompts you for a password if one has been set. You must enter the privileged level of the EXEC command interpreter with the enable command before you can use the configure command to configure a new interface or change the existing configuration of an interface. You modify the configuration of your router through the software command interpreter called the EXEC (also called enable mode). ATM Configuration Examples Using the EXEC Command Interpreter.This chapter contains the following sections: ![]() Minor differences among the platforms-with Cisco IOS software commands-are noted. The instructions that follow apply to all supported platforms. To continue your PA-A1 ATM port adapter installation, you must configure the ATM interfaces. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |